Scaffolding & Formwork Accessories

• Long lasting
• Precise design
• Fine finish

Used to connect two express temporary fence panels together.

Staircase couplers are used to connect timber treads to scaffold tube in order to form a staircase when a non-ladder solution is required.

Used to Used to attach scaffold tube to steel girder beams.ttach scaffold tube to steel girder beams.

It is Used One End, Connect with Scaffold Ladders, While Another End Fixing to Scaffold Tube, by locking them down tightly and protecting against cross winds.

OD48mm + C9:C11C10A9:C39C9:C12C10A9:C39A9:C15A9:C16A9:C17A9:C19A9:C20A9:C21A9:C23A9:CA9:C61

Used for quickly & securely locking the boards in correct positions. Nut Size – 1/2″ BSW x 21mm AF. Half Tee Bolts – 1/2″ BSW Thread, available in Mild Steel or Boron Steel. For 48.3 OD Tube size.

Sleeve couplers often just called sleeves can be used to connect scaffold tubes end to end joints on either standards, ledgers or bracing.

Used for connecting board supports (transoms) or putlogs to ledgers in scaffolding and also used in lighting rigs, staging and guard rails. Single couplers can also be used to secure toe boards on a scaffold.

Used to connect two scffolding poles at any angle. Swivel Couplers are used for adding digonal bracing to a scaffold structure and are adjustable to fit towers of any size.

Size :

• 48.3 x 48.3 mm
• 48.3 x 60.3 mm
• 48.3 x76.3 mm

Drop Forged Double Coupler / Right Angle Coupler. used as a connector between two Scaffold Tubes or Scaffold Tube and Standard.
Size :

• 48.3 x 48.3 mm
• 48.3 x 60.3 mm
• 48.3 x76.3 mm